|
|
|
Portable Display Systems
promotional
portable display systems, including event roller banners, roller banners, banner
stands, poster holders, floor displays, display backdrops, display stands,
graphic carriers, banner frames, pop up display stands, 'A' board poster
holders, mesh vinyl banners, printed vinyl banners, poster frames, lightboxes...
 |
Event Roller Banner
- SLRB
A super
economy roller banner. Designed for short term
use. Fitted with a high quality graphic.
Size: 800mm x 2000mm approx
|
 |
Eco Roller Banner
- PPERB
A
lightweight economy roller banner with slim base and bungee pole
making it very compact, complete with a twist out foot for extra
stability. Lightweight components.
Reusable
spring loaded rail clamp system for easy graphic
application. Hook/loop fastening quick change
graphic application. Twist out stabilising feet
for extra stability. Available in anodised silver.
Includes
quality padded carry bag.
Size: 800mm x 2010mm
|
 |
Barracuda Roller Banner
- PPBRB
Stylish
design and proven reliability make Barracuda our most
popular quality banner stand. Barracuda is the most
feature rich single sided roller banner available and
has been specially designed for maximum convenience and
ease of use. Available in anodised silver.
Charcoal grey end caps. Secure slide in graphic
system. Ratchet tensioned. Twist & lock
telescopic pole. Supplied with quality foam carry
bag.
|
 |
Whirlwind Poster Holder
- SLWPH
Heavy duty
pavement poster holder. Easy snap shut frame to take A1 size
posters. Hollow base can be filled with sand or water.
Available with single or double sided print. Replacement
graphics available.
|
 |
Economy Banner Stand - SLEBS
Similar
to the standard roller banner but with a lighter base construction.
Fitted with high quality graphic.
Size: 800mm x 2130mm
|
 |
Pacific Banner Stand - SLPRB
A compact
roller banner with slim base with twist out foot for extra
stability. Complete with bag.
Size: 800mm x 2130mm, 1000mm x 2130mm
|
 |
Fantasy Floor Display
- SLFFD
Solid signage
for floor display. A simple sign for indoor or outdoor
display. Takes a 10mm thick graphic.
Size: 1000mm x 1200mm
|
 |
Pegasus Backdrop
- SLPB
An
economic alternative to Pop up graphics.
Telescopic poles for
adjustable height and width. Complete with carry bag.
Visible graphic area from 860mm high x 1330mm wide and up to 2435mm
high x 2410mm wide.
|
 |
Horizon Graphic Carrier
- SLHGC
Our
largest one piece graphic carrier. Designed for indoor or
outdoor exhibition in light wind conditions. Hollow feet may
be filled with water or sand.
Size: width - 2500mm, height - 1500 - 2400mm
|
 |
Monsoon Banner Frame
- SLMBF
A light
weight support frame for displaying PVC banners. Easy push-fit
assembly. Ideal for pitch side and other sporting or
promotional events. Complete with carry bag.
Size: Frame size 1000mm high x 2500mm wide to take a 840mm x
2340mm banner - Frame size 1250mm high x 3000mm wide to take a
1090mm x 2840mm banner
|
 |
Pop Up Display Stands
- SLPUDS
Slightly
curved for greater stability, our pop up display systems are
available in 4 different widths and when erected stand just over 2
metres high. The graphic display strips are affixed by means of a
top hanger bar and have magnetic tape to the rear, providing
adhesion to the magnetic bars located on the lightweight aluminium
folding stand.
All systems are
supplied with a hard-shell ‘wheelie’ case that houses both the stand
and graphics. Low voltage and mains lighting kits are also
available.
Size: 1955mm x 2230mm, 2685mm x 2230mm, 2965mm x 2230mm,
3305mm x 2230mm
|
 |
'A' Board Poster Holders
- SPABPH
Suitable
for A1 poster size.
Can be used single or double sided.
Snap shut edges allow simple poster insertion.
|
 |
Mesh Vinyl Banners
- SLMVB
By
spraying solvent inks on to a PVC mesh fabric we can produce large
format printed outdoor banners ideally suited for display on the
outside of buildings when suspended from scaffolding or from a
framework. The perforations allow air movement to pass through the
banner graphics, thereby minimising the ballooning out of the banner
and the possible tearing of the eyelets and anchor points.
Reinforced edges are created to improve the strength of the banner.
Eyelets are fitted at regular intervals. It is best to avoid any
essential copy or detail within 40mm of the edge of the banner as
the placing of eyelets may well obscure this
If you do not see the size you require, simply contact us directly
for prices of custom sizes.
Size: 6 - 20ft wide x 2 - 5ft high
|
 |
Printed Vinyl Banners
- SLPVB
Digitally
printed banners on vinyl (PVC) are suitable for both exterior and
interior applications, and are usually supplied for advertising,
promotional and exhibition requirements. Fade-resistant solvent inks
are used for all of our banner printing, increasing the long-term
durability. Reinforced edges are created to improve the
strength of the banner. Eyelets are fitted at regular intervals. It
is best to avoid any essential copy or detail within 40mm of the
edge of the banner as the placing of eyelets may well obscure this.
If you do not see
the size you require, simply contact us directly for prices of
custom vinyl banners, graphics and signs.
Size: 6 - 20ft wide x 2 - 5ft high
|
 |
Trappa Poster Frame
- SLTPF
Snap
action edges with mitred corners complete with graphic.
Size: A5 - A0
|
 |
Lightbox
- SLLB
Complete
with backlit graphic. Easy snap shut fitting.
Size: A3 - A1
|
Back to Top
Tel:
01772 496711
Email:
enquiries@rallyfestpromotions.co.uk
Company No:
6686484 Vat No: 939
790 367
Website by RallyFest Promotions Ltd |
